Motomuck SquirterAugust 25, 2016
Automuck Clean 5 LitreJune 19, 2017
Wheelmuck + is a radical brake dust wheel cleaner, that has been specifically designed to remove brake dust effortlessly. It is PH neutral and safe to use on all wheels and painted surfaces. Wheelmuck + is a bit smelly, but you can rest assured that component is 100% biodegradable, and is even used in the cosmetics industry. Wheelmuck + undergoes a colour change from yellow to red as a reaction occurs to dislodge the brake dust iron contaminants, enabling it to be washed away with water.
Wheelmuck + is fast acting and has been specially formulated at a viscosity to allow easy application and to enable it to be very cost effective.
No Effort Product!
NB: It is recommended to only do one or two wheels at a time.
For ceramic pad dust, dirt, grease or tyre silicone overspray a slight agitation with a soft brush is necessary.
- Adjust nozzle on applicator to a fine spray position.
- Spray evenly on cool, dry wheel.
- Allow to stay on for 2-3 minutes. Wheelmuck+ changes from yellow to red to purple as reaction occurs.
- If any areas have dried and turned brown, do a quick recoat to those areas just prior to rinsing off.
- Rinse off with a sharp jet of water from hose or pressure washer.
- Reapply and agitate with soft brush if necessary.
Wheelmuck+ is designed to work on brake dust and iron contamination, if surface is greasy or full of dirt or has possible overspray from tyre shine products then use one of our other Motomuck products, or just give it a mild agitation.
Only apply to cool surface. Test on small hidden spot first to ensure compatibility with surface, and other possible automotive products that might be present on the surface. No liability will be accepted.
Colour Coding for WHEELMUCK+
- Sprays on YELLOW, if no change then no brake dust contaminants, or possibly ceramic pad dust.
- Turns RED as reaction starts.
- Turns PURPLE when reaction well underway.
- Turns DARK PURPLE when reaction is almost complete. Rinse off just before next step.
- If it turns BROWN, reaction has started reversing. A quick spray on BROWN spots with WHEELMUCK+ before rinsing off will sort this.
- Older style wheel balancing weights with metal clips. Older corroded clips will get tarnished.
- Zinc, Cadmium plated or other specific raw surfaces- oxidation can occur
- Don’t use on rims that are old, bad condition or damaged.
- Driveway oxidation stains- hose off after application to clean. If not then stain will disappear in a couple weeks.
- NZ made
- Completely different technology to regular wheel cleaners
- PH Neutral- Safe on wheels and painted surfaces
- Active is 100% Biodegradable
- Low Odor
- Low Foaming
- 2-3 x more wheel washes than similar imported products due to WHEELMUCK+ allowing a very thin application and still working extremely well- very cost effective compared to others.
- Easy application due to viscosity.
- Better coverage due to viscosity and anti foaming properties.
- Colour coding during stages of reaction with contaminants.
- Can be used for decontamination of vehicle body panels.