Motomuck Cleaner 2 Litre | Car cleaning product | Motomuck Nz
Motomuck Cleaner 2 Litre
August 25, 2016
Motomuck Cleaner 1 Litre | Car cleaning product | Motomuck Nz
Motomuck Cleaner 20 Litre
August 25, 2016
Show all

Motomuck Cleaner 1 Litre


with Pro Trigger

SKU: MM-1L Category:

1 Litre of MOTOMUCK Cleaner. This bottle comes with its own Pro trigger sprayer and is great for smaller applications. The trigger is a high quality adjustable unit, and facilitates easy use.

Motomuck Cleaner Original is a non-caustic, acid free cleaner that won’t start fading your trusty steed’s aluminium, alloy or plastics over a period of time. It will however cut through all that new or old grime, and bring out the original lustre that hides beneath that dirt. Once all the dirt is removed, Motomuck Cleaner leaves a protective film which helps prevent dirt sticking, and enhances the surface finish. Motomuck Cleaner original is a product the Motorsport and enthusiast market has been crying out for.

No need for brushes to get in to those tight fiddly bits around the motor or elsewhere, just a layer of MOTOMUCK CLEANER left on for 5-10 minutes, and then sprayed off with a jet of water, ridding the surface of all excess dirt. No need to use a high pressure cleaner, therefore preventing blasting out of grease in all linkages and bearings, and other short and long term damage caused by high pressure cleaners.

From Trucks, Engines, Heavy Machinery, Tools or Workshop floors.Anything that runs, goes, blows, has wheels or gets mucky can be unMUCKed with one of our Motomuck products! NO BRUSHES, NO EFFORT!

Additional information
Weight 1 kg
Reviews (0)


There are no reviews yet.

Be the first to review “Motomuck Cleaner 1 Litre”

Your email address will not be published. Required fields are marked *

Original cleaner application

Original cleaner application


  • Spray on over wet or dry dirt. If you hosed off excessive dirt, leave a few minutes to drip dry before applying as water can form a dilution barrier on the surface.
  • Use a brush only on excessively stubborn old dirt and on places where dirt has baked onto the exhaust.
  • If washing a street bike, don’t use Original Cleaner on the polycarbonate screen if it has been standing in the sunlight and heated up. It can have a reaction with some coatings that are on some screens.


  • Have a break and leave Original Cleaner to soak in for 5 to 10 minutes, allowing it to penetrate to the surface of your vehicle.


  • Spray off with a jet of water and watch the muck fall off. After a couple uses of Original Cleaner, your vehicle will start looking as clean as new. It just gets better from there on!

Don’t apply on hot surface. Streaking can occur if Original Cleaner tries to remove certain existing care products. Some new Nano coatings used in the  automotive industry don’t allow washing with anything other than water alone. Test product on hidden spot to ensure compatibility, prior to application.


  • Original Cleaner can be applied undiluted. In this ratio it deposits the protective layer on the virgin surface once all muck is removed.
  • Dilute 50:50 with water for regular cleaning. You will notice after about 5 washes, that tiny bits of dirt will still be evident after a wash, and that the surface finish will be less shiny. Just use once as undiluted to reapply the protective coating and regain full shine.
  • Dilute 20:80 with water for scrooge cleaning. Firstly spray all dirt off vehicle surface with pressure cleaner. Spray on diluted solution. Leave 5-10 minutes. Pressure clean off and use brush where necessary.

You may also like…